| Audio series distribution products adopts high-density distribution
module (FA8-184, STO-184) developed by ZE, which achieve flexible
and reliable connection between subscriber cable and the cable of
Branch Exchange. It also can protect the equipment and personnel. The products adopt IDC (insulation displacement connection
technology) to achieve reliable, safe and convenient operation.
With its reliable installation and high density distribution, it is
widely adopted by users now. Each index is in according with the industry standard of
YD/T694-2004 MDF. FA8-184-100 Protection Module
Dimensions:H×W×D=185×135×85mm;
Distance of mounting holes:135mm Features:
1.Special design to ensure full-front access and high-density
distribution;
2.Dimensions of 100-pair module only at 185×135×85mm (H×W×D);
3.Surface gilding technology is adopted for the double-layer,
double-slot outrigger to give convenient multiple connection, good
electrical performance and extended service life. With four
contact points between plug-in wire and outrigger, the module
offers large airtight area, low contact resistance, great
anti-pull-out force and reliable connection.
4.Core diameter of the applicable wires at 0.32~0.6mm and plug-pull
life greater than 200 times
5.Outrigger is covered by plastic components of the module to
protect the operators from any possible injury due to physical
contact with the outrigger.
6.Unique wire-passing plate design to keep subscriber lines to the
left and jumper wires to the right for reasonable wiring and
clearly-marked corresponding position of each pair so that wiring
and disconnecting can be easily done without any mistakes.
7.Isolated structure and label for each pair so that maintenance on
a unit won’t affect the function of adjacent protection units
8.Alarm for the 10-pair module
9.Built-in closed protection unit features reverse insertion
prevention design and no interference with the jumping operation
when the protection unit is in place.
10.Excellent inflammability of all plastic components up to Class-A
specifications of GB/T5169.7 Standard
11.Compatible with ADSL service STO-184 Testing Module
Dimensions:
STO-184-128 Testing Module:H×W×D=256×87×65mm;
STO-184-160 Testing Module:H×W×D=318×87×65mm;
Distance of mounting holes:180mm Features:
1.Surface gilding technology is adopted for the double-layer,
double-slot outrigger to give convenient multiple connection, good
electrical performance and extended service life. With four
contact points between plug-in wire and outrigger, the module
offers large airtight area, low contact resistance, great
anti-pull-out force and reliable connection.
2.Core diameter of the applicable wires at 0.32~0.6mm and plug-pull
life greater than 200 times
3.Outrigger is covered by plastic components of the module to
protect the operators from any possible injury due to physical
contact with the outrigger.
4.Unique wire guide design makes sure that each pair carries a
clearly-marked label and is arranged neatly in the only
corresponding wire-passing groove;
5.Clear-marked label for each pair in a complete marking system
6.Compatible with ADSL service FA9-240 Protection Unit Features:
1.Integrated design for over-voltage and over-current protection
2.Meeting the installation requirements for GDT, SAD together with
polymer and ceramic PTC
3.Copper contact wiring is adopted for enhanced reliability in
protection.
4.Reverse insertion prevention structure Specifications:
1.Temperature: -5~40℃
2.Relative humidity: < 85% (+30℃)
3.Atmospheric pressure: 70~106Kpa
4.Insulated resistance6000M; insulated resistance after high
temperature, low temperature, temperature fluctuation, damp heat
test ≥3000M
5.Dielectric strength: 1000V (45~60Hz)/1 min, no spark, no flash
over
6.Contact resis | 
